Home page

PS302DM 30v 2a adjustable power supplies

Model:PS-302DM30V2AadjustablepowersuppliesPSseriespowersupplyisakindofcontinuouslyadjustablelinearDCvoltageregulatorpowersupply withhighstability,highreliabilityandlownoise.Itsoutputvoltageandcurrentc

Key words:

Classification:

Linear dc power supply

Hotline:

+86-769-87722745

Online Message

E-mail

PS302DM 30v 2a adjustable power supplies

Model: PS-302DM

30V 2A adjustable power supplies

PS series power supply is a kind of continuously adjustable linear DC voltage regulator power supply with high stability, high reliability and low noise. Its output voltage and current can be continuously adjusted. Also it can be both as constant voltage and constant current dc power supply. Its constant voltage and current can be auto-conversion. This low cost and universal power supply can be used in many different areas, from production lines to school use.

Feature:

1.Single output, single phase

2.110V/220 ±10% input voltage, dual-input voltage.

3.Output constant current adjustable

4.Output constant voltage adjustable

5. 3LED voltage and current display

6.mA and A converted,when less than 1A it can convert automatically mA: 0-990mA continuous adjust . Suitable for higher precision testing.

7.Output switch key,can start or stop the output,Avoid the instantaneous impact of current, and play a good protective role.

8.Constant voltage and current operation model. C.V and C.C convert automatically

9.Current limitation protection

10.Good quality, cost-effective

Application:

Suitable for the laboratory, electronic, communication equipment maintenance, products line, scientific research and teaching units

Specifications:

Model: PS-302DM

Input voltage: 220 V/110V±10% 50/60Hz (setting switch at the back)

Output voltage: 0-30V

Output current: 0-2A

mA: 0-990mA(less then 1amp)

Operating Temperature: 0℃to 40℃

Relative humidity: <80%

Storage Temperature:-10℃ to 70℃

Relative humidity: <70%

Constant voltage state:

Voltage stability: <0.01%+3mV

Load stability :< 0.01%+5mV

Recovery time :< 100μS

Ripple & noise : <1.0mVrms

Temperature coefficient: < 300PPM/0C

Constant current state:

Current stability: < 0.2%+3mA

Load stability :< 0.2%+3mA

Ripple & noise :< 3mArms

Mode	Rated Output			Dimension
Mode	Voltage(V)	Current(A)		D×W×H(mm)
PS-302DM	0-30V	0-2A	0-990mA	285×128×145
PS-303DM	0-30V	0-3A	0-990mA	285×128×145
PS-305DM	0-30V	0-5A	0-990mA	285×128×145
PS-6402DM	0-64V	0-2A	0-990mA	285×128×145
PS-6403DM	0-64V	0-3A	0-990mA	285×128×145